anadisk用法试译
with the new backup disk in the disk drive,
;将(用winimage软件释放镜像文件到的)软盘放入软驱
run the anadisk program you unzipped,
;运行anadisk程序(注意,可能必须在实dos下)
pressing the space bar to quit the title screen.
;按[空格键]退出标题(授权)画面(进入软件画面)
use the right arrow and select format.
;使用[方向键右键]来选择format菜单(后按回车)
then select f6 - high density, f3 - sectors - 18,
;按功能键[f6],切换到high density;按[f3],输入18后回车
f4 - start cylinder - 78, f9 - cylinders - 1, f7 - side - 2.
;按[f4]输入78;按[f9]输入1;按[f7]选side 2
in the lower part of the screen,
;注意屏幕的下方
move with the down arrow to no. 18. move right to sct.
;按[方向键下键]到18,再按[方向键右键]到sct
press shift f6 and enter 80 as the sector number.
;再同时按住[shift]和[f6]键,输入80后回车
press enter then 'y' to begin format of track 78.
;按回车,再按[y]键开始格式化(完成后就可以退出此程序了)